Today, this article will cover the AirPods pro pairing error. What happens sometimes your Airpods pro shows pairing error. Although, Apple’s AirPods are incredibly portable, have a fantastic sound, and provide quick access to Siri.
But sometimes, you may suffer an AirPods pro pairing error. So, here’s how to troubleshoot your AirPods and give them a fresh start with your iPhone or iPad, regardless of whether you’re experiencing battery issues, pairing issues, or other issues, especially why the LED on my AirPods is not working.
How to Fix an AirPods Pro Pairing Error?
To fix the AirPods pro pairing error, you may follow the following steps:
- Make sure you have an iPad running the most recent version of iPadOS, an iPhone, an iPod touch, or both running the most recent version of iOS.
- Ensure both AirPods are charging by placing them in the charging case.
- Go to Settings > Bluetooth to confirm that Bluetooth is turned on.
- Ensure your AirPods are selected as your audio device if connected. Continue to the following step if your AirPods are listed as devices but don’t connect.
- After 15 seconds have passed, open the lid after closing it. For up to 10 seconds, press and hold the setup button on the charging case. Your AirPods should be ready to use when the status light flashes white.
- Hold the charging case next to your iPhone, iPad, or iPod touch with your AirPods inside and the lid open.
- Take the actions listed on your iPhone, iPad, or iPod touch screen.
- Check out your AirPods. Reset your AirPods if the connection problem persists.
Must Read: How to Check Your AirPods Battery?
Why Won’t My AirPods Go Into Pairing Mode?
Your AirPods may be unable to pair with your Bluetooth devices for a variety of reasons. Low battery charge, Bluetooth issues, software update issues, hardware damage, debris on the AirPods or charging case, and other factors are some of the potential causes for AirPods pro pairing error.
The ability to quickly and easily link them with other devices, whether from Apple or another Bluetooth-capable product, is one of the significant features of the AirPods and AirPods Pro series.
You might do many things if you are also searching for the solution for an AirPods pro pairing error. However, there may be instances when you cannot pair the wireless earphones. We can offer some troubleshooting advice if you need it.
To fix the AirPods pro pairing error, you may follow the following things-
1) Check Your Battery Life
Checking the battery life of your AirPods should always be your first line of defence when experiencing any pairing issues to give the solution to an AirPods pro pairing error. You won’t be able to pair it with another device if the case’s battery, the earphones’ battery, or both are dead.
The status light on your AirPods case will indicate the remaining battery life. Depending on the kind of AirPods you have, the light will either be inside the case or outside. The green light on your AirPods in the case means they are ultimately charged. There is less than one full charge left when the indicator is amber.
Charge the AirPods if you notice an amber or no light. Depending on your charging case, there are a few different ways to achieve it. This also can help in solving the AirPods pro pairing error.
2) Make Sure Bluetooth is Turned On
If you suffer from an AirPods pro pairing error, ensuring your Bluetooth connection is active is another easy trick. The wireless protocol is required to pair your AirPods with any device, be it an Apple device like an iPhone or another.
Go to Control Center on an iPhone or iPad to quickly verify Bluetooth is turned on. Please verify that the Bluetooth logo is tinted blue by looking for it. If not, touch the icon to turn it on.
Must Read: What Are The Best Bluetooth Speakers Under 100 dollars?
3) Restart Your Device
Restarting the device you are attempting to pair the AirPods with is the next step if you are still experiencing problems. It will usually solve any problems if you are suffering from an AirPods pro pairing error.
You may force-restart any contemporary iPhone by swiftly pressing the volume-up and volume-down buttons. When the Apple logo appears, press and hold the side button.
4) Reset Your AirPods
You can next try resetting your AirPods to their factory default settings to check whether the problem has been resolved if you’re still suffering from an AirPods pro pairing error.
Put your AirPods in the charging case first, then secure the cover. Open the case’s lid once 30 seconds have passed. On your Apple device, go to Settings > Bluetooth next. Choose the I button next to the AirPods’ name. Select Forget This Device after that.
For about 15 seconds, hold down the setup button on the back of the AirPods case until the status light flashes amber and then white..
Must Read: How To Fix The Right AirPod Not Working Even After Reset?
5) Check your software updates
Checking some software updates of your system can also solve the AirPods pro pairing error problem. Using the aforementioned techniques, if your AirPods still won’t connect, there may be a problem with your device’s settings. Make sure your device is using the most recent firmware as a first step. The following software is needed for AirPods and other Apple hardware:
- iOS 10.2 or later is required for iPhone, iPad, and iPod touch.
- watchOS 3 or later for Apple Watch
- Mac: Sierra or a later version
6) Clean your Airpods and its charging case
It’s possible that the AirPods aren’t making good contact with the electrical contacts at the bottom of the charging case if you’ve attempted pairing them but your case doesn’t display a flashing light (that is, the inside-the-case charging points).
It also can solve AirPods pro pairing error problem. And for that, you have to clean your AirPods and the bottom of the AirPods case with a little wet, lint-free cloth might help to resolve this problem. If the issue continues, get in touch with Apple and, if possible, request a replacement.
Must Read: How To Properly Clean iPhone 14 Speakers Without Damaging Them?
How Do I Reset My AirPods Pro Pairing?
If you are also searching for the solution to an AirPods pro pairing error, you can reset and try to solve it. For that-
- Close the charging case after placing your AirPods inside.
- Give it a minute.
- Your charging case’s lid should be opened.
- Go to Settings > Bluetooth and tap the More Info button next to your AirPods on your iPhone, iPad, or iPod touch. (If your AirPods aren’t shown under Settings > Bluetooth, move on to the next step.)
- When prompted, tap Forget This Device once more to confirm.
- Press and hold the setup button on the case’s back for roughly 15 seconds while the lid is open or until the status light flashes amber and then white.
- Reconnect your AirPods by placing them next to your iPhone, iPad, or iPod touch with the charging case lid open and your AirPods inside. Take the actions listed on your device’s screen.
Why Do My AirPods Say Error?
When attempting to link their AirPods with their smartphones, some customers have run into an AirPods pro pairing error. After trying to do so, the Connection Failed error message appears on the screen. When you attempt to connect your AirPods to your phone incorrectly, this issue occasionally arises.
When attempting to connect your AirPods, a few procedures must be completed for it to succeed. In addition, the onboard cache of the AirPods themselves might be the root of the problem. Just follow the instructions as we’ll demonstrate how to fix the issue in concern in this article.
Keep The Case Lid Open.
If you are searching for the solution to an AirPods pro pairing error, you must ensure that the charging case lid is open. It turns out that specific consumers have been having the issue when they attempt to pair their AirPods improperly. One of the most crucial requirements for pairing your AirPods is keeping the charging case lid open.
Forget AirPods
Making a new connection with your AirPods is another approach you can fix the issue at hand. You must forget your AirPods to remove the outdated cache that is still kept on your phone. As a result, when you pair the devices once more, a new connection will be made, and the issue should be resolved. And that has also been reported by other users with a related problem.
Reset AirPods
You can try resetting your AirPods to see if that solves the issue if you are still receiving the relevant error message while attempting to connect to them. However, you must first remove the AirPods from your device. Therefore, use the abovementioned technique and forget your AirPods without attaching them again.
Reset Network Settings
Last, your phone’s network settings may be the issue if none of the above solutions have worked for you. You must reset your network settings if this is the situation. Doing this will remove the previous cache and restore your network settings to their original state.
Why Can’t I Reset My AirPods?
The charging port or AirPod tail may be dusty if your AirPods won’t reset and there isn’t an amber light on the case.
Lint and other debris can accumulate over time in the AirPods’ charging port or tail. And that may ultimately prevent your AirPods from making appropriate contact with your charging port, which prevents your AirPods from resetting.
Must Read: How To Make Your 3rd Generation AirPods Louder?
Conclusion
AirPods are counted in one of the most used and best headphones or earbuds. As they are easy to use and give us a very good feeling when we use it. Most Bluetooth devices can be paired with AirPods quite easily, but occasionally the Connection isn’t there.
We just discussed earlier in this article how to resolve the most frequent problems and what to do if they don’t go away. We hope your query is resolved now. And if not, you can write your query regarding it in the comment section.
FAQs: Fix an AirPods Pro Pairing Error
After the detailed discussion on AirPods pro pairing error, we are going to discuss some frequently asked questions or FAQs regarding the Airpods Pro Pairing error and how to fix them. These are as written below. Kindly have a look:
Q. How can I reset my AirPods to factory settings?
A. For 15 seconds, you should hold down the Setup button. The status light ought to switch from amber to white flashing. Put the lid on. You’ve entirely reset your AirPods.
Q. When AirPods won’t reset, how do you do it?
A. For that, hold the setup button on the case’s back with the lid open for at least 15 seconds. When the status light on your case changes from amber to white, keep holding down the button.
Q. How can I take someone else’s AirPods out of their iCloud?
A. Choosing the Devices tab. Choose the appliance you want to take out. Click the More Info icon on the map. To remove this device, click on that.
Q. Can I lend my AirPods to someone else?
A. It makes it possible for someone to connect your AirPods to other iPads or iPhones without your permission if you are the AirPods’ owner.
Q. How Can I Fix My Unable to Connect AirPods?
A. For up to 10 seconds, press and hold the setup button on the casing. Your AirPods should be ready to connect when the status light starts to flash white. Hold the case next to your iOS device with your AirPods inside and the lid open. The instructions are on the screen of your iOS device. Check out your AirPods. Reset your AirPods if the connection problem persists.