When your Skullcandy wireless Earbuds does not work its time to Reset Skullcandy Wireless Earbuds. It may be necessary to reset your Skullcandy wireless earphones if you are experiencing issues with them and are unsure of what to do next.
Reset Skullcandy Wireless Earbuds is very easy, at least if you have clear directions! There is really no reason not to try it, particularly if nothing else appears to be working, and it won’t unquestionably worsen things or cause any new issues.
I’ll attempt to make my explanation of how to reset any Skullcandy wireless earbuds as clear and uncomplicated as feasible in this article. When you’re done, you’ll probably discover that they successfully paired with your device and each other.
How To Reset Skullcandy Wireless Earbuds?
The methods to Reset Skullcandy Wireless Earbuds models vary, so how to recalibrate the Indy’s buds, Hesh, Jib, or any of the others will appear slightly different. In order to make things fast and simple, I will outline the general process to Reset Skullcandy Wireless Earbuds here. In the sections that follow, we will go into more detail about the specific process for each model of Skullcandy wireless earbuds.
How To Factory Reset Any Skullcandy True Wireless Earbuds?
I wish I could just provide a single, general set of directions, but each model’s factory Reset Skullcandy Wireless Earbuds procedure is a little bit different.
Therefore, to make things simpler for you, I’ve written out the most straightforward instructions for resetting each of them. Simply locate your specific model of Skullcandy earbuds on this list and click on that link to be directed to the appropriate set of instructions.
How To Factory Reset Skullcandy Dime Earbuds?
To Reset Skullcandy Wireless Earbuds, the older Dime and the more recent Dime 2 can both be used with this method.
- First, “forget” your Skullcandy Dime earphones from your phone, computer, or other device.
- Discard the case from your Skullcandy Dime earbuds and switch them on.
- No matter which earbud you choose, tap the back twice and then keep it still for at least two seconds. Your Dimes are now in pairing mode after being restored.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Indy Earbuds?
This is the second method to Reset Skullcandy Wireless Earbuds. Steps are:
- First, “forget” your Skullcandy Indy earphones on your phone, computer, or other electronic device.
- Touch and hold the back of each of your Skullcandy Indy earphones for at least 6 seconds to turn them off.
- Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
- Once you’ve reinserted your Indy into their case, a red light should appear. You should then simultaneously remove them from the case.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Indy ANC Earbuds?
All Indy ANC versions, including the first-generation Indy ANC and the Indy ANC Fuel, can be used with this method. The third method to Reset Skullcandy Wireless Earbuds is:
- First, “forget” your Skullcandy Indy ANC earphones from your phone, computer, or other device.
- By touching and gripping the backs of both Skullcandy Indy ANC earbuds for at least 6 seconds, you can turn them off.
- It doesn’t matter if you clean each earbud separately or all of them at once.
- Just as you did to switch them off, touch and hold each earbud now, but this time hold them for at least 15 seconds or until you see a solid blue light.
- To reset them, give the rear of each earbud two taps.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Jib Earbuds?
The forth method to Reset Skullcandy Wireless Earbuds is jib Earbuds. All Jib versions, including the first Skullcandy Jib and the most recent Jib True 2, can be used with this method.
- First, “forget” your Skullcandy Jib earphones on your phone, computer, or other electronic device.
- Touch and hold the back of each of your Skullcandy Jib earphones for at least 4 seconds to turn them off.
- Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
- You should see a red light when you re-insert your Jib into their container, at which point you should also remove them both simultaneously.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Mod Earbuds?
Any Skullcandy Mod wireless earphones can be used to Reset Skullcandy Wireless Earbuds with this procedure.
- First, “forget” your Skullcandy Mod headphones on your phone, computer, or other device.
- Remove the cases from the two earphones and turn them on.
- Touch and hold both earphones’ backs simultaneously for at least three seconds.
- After three (3) purple flashes and a tone signaling that they have been reset, the earbuds will automatically enter pairing mode.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Push Earbuds?
Both the Push original and the Push Ultra earphones can be used with this method to Reset Skullcandy Wireless Earbuds. See the directions below for the Push Active.
- First, “forget” your Skullcandy Push earphones on your phone, computer, or other electronic device.
- By touching and keeping each earbud’s back for at least six seconds, you can turn off your Skullcandy Push earbuds.
- Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
- The Push earbuds will initiate pairing mode when you press the power button on the left of the earbud.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Push Active Earbuds?
Only the Skullcandy Push Active earphones are compatible with this procedure. See the directions just above for both the Push Original and Push Ultra earphones to Reset Skullcandy Wireless Earbuds.
- First, “forget” your Skullcandy Push Active headphones on your phone, computer, or other device.
- Take out the case from the Push Active earphones.
- Only the right earbud’s rear should be touched and held for three seconds.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Sesh Earbuds?
The Sesh and Sesh Evo earphones can be reset using this method while doing the Reset Skullcandy Wireless Earbuds. pertaining to the Sesh ANC (active noise cancellation) earphones.
- First, “forget” your Skullcandy Sesh headphones on your phone, computer, or other device.
- Touch and hold the rear of each of your Skullcandy Sesh earbuds for at least 4 seconds to turn them off.
- Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
- You should see a red light when you put your Sesh back in their case; take them out simultaneously with the red light.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Sesh ANC Earbuds?
The Sesh ANC (active noise cancelling) earphones are compatible with this procedure to Reset Skullcandy Wireless Earbuds. See just above for the Sesh and Sesh Evo earphones.
- First, “forget” your Skullcandy Sesh ANC earphones from your phone, computer, or other device.
- Remove the cases from the two earphones and turn them on.
- Touch and hold both earphones’ backs simultaneously for at least three seconds.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Spoke Earbuds?
This is the next method to Reset Skullcandy Wireless Earbuds. Steps for this method are:
- First, “forget” your Skullcandy Spoke earphones on your phone, computer, or other device.
- Touch and hold the back of each of your Skullcandy Spoke earphones for at least 4 seconds to turn them off.
- Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
- A series of flashing lights will first appear, and then they will finally turn on. Removing your Spokes simultaneously with putting them back in their case should result in a red signal.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
How To Factory Reset Skullcandy Vinyl Earbuds?
Any wireless Skullcandy Vinyl earphones can be used with this method to Reset Skullcandy Wireless Earbuds.
- First, “forget” your Skullcandy Vinyl earphones from your phone, computer, or other device.
- By touching and holding each earbud’s back for at least 4 seconds, you can turn off your Skullcandy Vinyl earphones.
- Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
- You should see a red light when you put your Vinyl back in their case. When you take them both out at once, you should see the red light.
- Now that Bluetooth is turned back on, you can connect your phone, computer, or other device as usual.
Final Words
You should Reset Skullcandy Wireless Earbuds each time you connect them to a new Bluetooth device. If your earphones are not functioning properly, you can also reset them.
Resetting is a simple and quick procedure. You learned how to reset your Skullcandy wireless earbuds in this piece. Additionally, we detailed the precise restart procedure for each model.
FAQs: Reset Skullcandy Wireless Earbuds
After talking about how to Reset Skullcandy Wireless Earbuds, its time to talk about some FAQs. These are:
Q. How are Skullcandy headphones reset?
Ans. On the right earpiece, press and hold the volume up and volume down keys. You can tell the headphones have been adjusted when the LED light begins to flash yellow. Resetting your headphones may be advantageous for a variety of factors. The pairing with a suitable device is one of these problems.
Q. How can I make my Skullcandy Indy earbuds come on?
Ans. Touch and hold the back of each of your Skullcandy Indy earphones for at least 6 seconds to turn them off. It doesn’t matter if you clean each earbud separately or all of them at once. Just as you did to switch them off, touch and hold each earbud now, but this time, keep holding them for at least 10 seconds.
Q. How reliable are Skullcandy Bluetooth headphones?
Ans. Who wishes to be attached to their device, after all? Skullcandy is a well-known brand of headphones, and their Bluetooth choices are incredibly practical and all-around easy to use. However, Bluetooth inevitably runs into issues, whether it’s pairing with a Bluetooth device or simply a nagging led indicator that won’t go away!
Q. How do I link my iPhone to my Skullcandy headphones?
Ans. Select your Skullcandy headphones in the Bluetooth settings on your device (such as your iPhone, iPad, laptop, etc.). It’s that easy! To make the headphones join, you might need to choose “add Bluetooth device,” but after that everything should be clear-cut and self-explanatory.