How to Pair Skullcandy Wireless Earbuds?

There are a few things you may do if you have any difficulty to pair Skullcandy wireless earbuds. You might try looking in the manual for the instructions. If it doesn’t work, try pushing the earbud buttons six to eight times or holding down both for roughly 10 seconds to reset your Skullcandy earbuds.

The overall approach to solving your pairing issue, i.e. to pair Skullcandy wireless earbuds is as follows! However, numerous Skullcandy earbuds are available in various types, each with a unique way to connect to your devices.

---

Tips to Pair Skullcandy Wireless Earbuds

Sometimes it happens that we are not able to pair Skullcandy wireless earbuds after many attempts. Now we are going to tell you some basic but important steps for that.

Step-by-Step Guide

Step- by- step guide to pair Skullcandy wireless earbuds is:

• Be careful to charge your earbuds. Plug them in to charge for a while if they aren’t.
• On your device, enable Bluetooth connectivity.
• When the LED flashes white, press and hold the power button to put your earbuds in pairing mode.
• Find the name of your earbuds on your device. Typically, they will appear as “Skullcandy” or another such name.
• You can choose the name of your earbuds to connect them.

Try the following advice if you’re still having issues to pair Skullcandy wireless earbuds:

1. Ensure that your gadgets are situated close to one another. The distance between them should be no more than five feet.
2. Restart the equipment. It’s possible that a soft reset will solve the issue. With smartphones, activating airplane mode is a simple way to do this.
3. Turn off any potential interference. Say your earbuds and trusty Bluetooth speaker are generally connected. Turn it off to see if it helps the connection.
4. Use your phone’s “Forget this device” feature to pair your earbuds once more, or unpair them from another device before performing a full factory reset on the earbuds themselves.

This will frequently solve pairing problems and restore your earphones to normal operation.

Look for the small emblem in the screen’s upper right corner if you are still having problem to pair Skullcandy wireless earbuds. Go to settings and enable it if you cannot see it.

• Turn your phone so that it can be found. First, activate Bluetooth by going to settings.
• The ability to communicate between two items is required. Additionally, they must be near one another.
• Make sure to switch your phone off and back on. It sometimes solves the issue. Put your phone on airplane mode to accomplish this.
• Everything attempting to connect to the Bluetooth speaker should be turned off. Your phone may be attempting to reconnect with its former partner if you are having problems pairing it with the speaker. Some older devices will only make one connection attempt at a time. Turn off Bluetooth if it was previously associated with something else.
• Make sure both devices have electricity before attempting to pair them. In some devices, a low battery will cause Bluetooth to be disabled. Check to see that both the other gadget and your phone have enough power before attempting to pair them.
• Remove a component from one phone, then find it again. You might wish to start over if your phone can see a device but isn’t receiving data from it.

Must Read: Best Skullcandy Wireless Earbuds for Working Out

For iOS

By choosing a device’s name and then choosing to Forget This Device in iOS, you can remove a device from your iOS settings.

For Android

Choose a device’s name in the Android settings menu, and then choose Unpair. The devices might reconnect if the operation is repeated.

Cut ties with the Wi-Fi router.

• Another potential cause of issues like to pair Skullcandy wireless earbuds could be interference from equipment using the same frequency, such as your Wi-Fi router. However, positioning your devices too close to the router may not be a smart idea. Wi-Fi has been designed to handle this.
• Any USB 3.0 devices in the area should be removed. In addition to its backward compatibility, USB 3.0 interference is a problem.
• If your Bluetooth device isn’t working with your PC, try pairing it somewhere else. Consider using a different set of headphones if the connection isn’t working since USB 3.0 connectors on modern computers, for instance, are frequently faster than USB 2.0 ports.
• Verify the compatibility of the devices you intend to link. Your device’s profile lists the things it can connect to, such as a headset or another gadget. If you’re unsure, you should refer to your user manual.

---

Final Words

If you are having problem to pair Skullcandy wireless earbuds, here are instructions on how to connect and troubleshoot your Skullcandy earbuds if you recently bought a pair and are unsure how to pair them properly or suspect there may be problems with only one earbud being paired.

We just explained some ways to resolve your problem and hope you will like them. And if you have any problem, pls leave a comment in the comment section.

---

FAQs: Pair Skullcandy wireless earbuds

Now we are going to tell you some frequently asked questions regarding to pair Skullcandy wireless earbuds. These are: